Get in touch
0800 231 5199
| Series code | Title | Year |
|---|---|---|
| [Unnumbered] | Construction machinery - access to cutting wheel of top cutting machines |
2009
|
| [Unnumbered] | E.coli O157 : Health Alert - avoiding ill health at open farms |
2009
|
| [Unnumbered] | Failures of Liftlux Scissor lifts Models SL260-25 and SL245-25 |
2009
|
| [Unnumbered] | Laptop computer charging trolleys safety alert |
2009
|
| STSU 2-2019 | Safety notice to act as a reminder of the phenomenon of condensate induced water hammer |
2019
|
| STSU 2-2016 | Certain types of pool hall lighting systems on runners |
2016
|
| STSU 1-2020 | Use of face masks designated KN95 |
2020
|
| STSU 1-2019 | Change in enforcement expectations for mild steel welding fume |
2019
|
| STSU 1-2017 | Catastrophic failure of silo–bolted conical bottom section |
2017
|
| SID 2-2012 | Management of the risks from legionella in cooling towers and evaporative condensers |
2012
|
| SID 1-2012 | Risk of MSA SavOx units catching fire if the wearer does not follow start up procedures |
2012
|
| OSD 7-2010 | Waterlogic water dispensers with a UV system or WL 3000 Cold only model |
2010
|
| OSD 6-2010 | Dropping of a 9.5 tonne load on an offshore installation as a result of the incorrect manufacture of a 15 tonne Flemish eye crane pennant |
2010
|
| OSD 5-2010 | Assessment of the adequacy of venting arrangements for cargo oil tanks on FPSO and FSU installations |
2010
|
| OSD 3-2010 | Back-loading and carriage of hazardous oil contaminated bulk cargo on offshore supply vessels |
2010
|
| OPSTD MS03-2010 | Handling and storage of large sheet stone slabs |
2010
|
| OPSTD MS 4-2010 | Rollover risk associated with the use of road vehicles in off-road applications in quarries |
2010
|
| OPSTD MS 2-2010 | Scissor lift failure in motor vehicle repair facility |
2010
|
| OPSTD 9-2010 | False engagement of tipping hooks on 'builders' skips |
2010
|
| OPSTD 8-2010 | Fatality caused by stacked boards collapse |
2010
|
| OPSTD 5-2010 | People in commercial waste containers |
2010
|
| OPSTD 4-2011 | Use of Mobile Phone 'Expert XP-Ex-1' in potentially explosive atmospheres |
2011
|
| OPSTD 2-2012 | Vertical lifting platforms or lifts for people with impaired mobility - potential falls from height risks to employees and members of the public from over-riding door locking safety devices |
2012
|
| OPSTD 2-2011 | Risks to users from firewood processing machines |
2011
|
| OPSTD 10-2010 | Gas boilers : flues in voids |
2010
|
| OPSTD 1-2014 | Preventing entrapment in plastics rotational moulding ovens where there is whole body access |
2014
|
| OPSTD 1-2013 | Use of chain flail/non standard cutting attachments on brush cutters |
2013
|
| OPSTD 1-2012 | Risks to vulnerable members of the public from falling from height from windows |
2012
|
| OPSTD 1-2011 | Powered perimeter gates |
2011
|
| OPSD 1-2019 | Platform lifts (vertical lifting platforms or lifts for people with impaired mobility). Risk of falls from height to employees/workers and members of the public |
2019
|
| HID 6-2010 | Safety alert to operators of COMAH oil/fuel storage sites and others storing hazardous substances in large tanks |
2010
|
| HID 5-2011 | Provision of key clinical information on laboratory specimen request forms |
2011
|
| HID 5-2010-2 | Hydrocarbon leak and fire caused by incorrect seal material used in the assembly of a pipe work clamp connector |
2010
|
| HID 5-2010-1 | Control of legionella bacteria in hot and cold water systems |
2010
|
| HID 4-2014 | Withdrawal of the (UN 0349) 1.4S classification for DynaEnergetics HMX 165 Octocord from the List of Classified Explosives and Fireworks |
2014
|
| HID 4-2011 | Preventing inrushes at underground mines |
2011
|
| HID 4-2010 | Stress corrosion cracking of beverage mixed gas cylinders |
2010
|
| HID 3-2014 | Storage tank external floating roof |
2014
|
| HID 3-2013 | Sizing of latex neck seals used with diving equipment |
2013
|
| HID 3-2011 | HSE issues gas detector safety alert |
2011
|
| HID 3-2010 | Failure of pipeline emergency shut-down valve |
2010
|
| HID 2-2014 | Liquid metal embrittlement by mercury in the refining and allied process industries |
2014
|
| HID 2-2013 | Chloride induced stress corrosion cracking of stainless steel thermowells |
2013
|
| HID 2-2011 | Jacking of flat bottomed storage tanks |
2011
|
| HID 1-2016 | Use of Barrier Glands in Potentially Explosive Atmospheres to meet IEC 60079:14 2013 |
2016
|
| HID 1-2015 | Norfolk Range large wheeled dry powder fire extinguishers manufactured before 2009 by UK Fire International Ltd |
2015
|
| HID 1-2014 | Failure of a foot valve actuator on an LPG road tanker to operate on demand at low temperatures created by a loss of containment |
2014
|
| HID 1-2013 | Corrosion in trunnion supports of pipework containing hazardous substances |
2013
|
| HID 1-2011 | HSE warns of dangers of diving for shellfish following two recent tragedies |
2011
|
| FOD WSW 2-2010 | Risks to Service users known to self-hoist and transfer using ceiling track hoists |
2010
|
| FOD WSW 1-2010 | Risks to pedestrians from crushing zones on electrically powered gates |
2010
|
| FOD SPG 3-2010 | Death prompts telehandler warning |
2010
|
| FOD 8-2010 | Deadly explosions during cutting of drums and containers |
2010
|
| FOD 7-2010 | Risks to pedestrians from crushing zones on electrically powered gates – 2 |
2010
|
| FOD 6-2010 | Avoiding trapping/crushing injuries to people in the platform of mobile elevating work platforms (MEWPs) |
2010
|
| FOD 5-2014 | Tower crane slew brakes |
2014
|
| FOD 5-2010 | Risks associated with working on or near lamp columns with non-standard roots during excavation works |
2010
|
| FOD 4-2014 | Hydraulic injection injury |
2014
|
| FOD 4-2011 | Mobile crushing plant - unintended movement of tracks |
2011
|
| FOD 4-2010 | Manitowoc Cranes, Potain Tower Cranes - MD, MDT and MR series - Potentially faulty spigots on K600 and K800 mast sections |
2010
|
| FOD 3-2014 | Devices used to reduce operator entrapment and crushing on mobile elevating work platforms |
2014
|
| FOD 3-2013 | Electrical safety - inflatable blower fans |
2013
|
| FOD 2-2017 | Track tensioning incident |
2017
|
| FOD 2-2015 | Extendable Scaffolding Loading Bay Gate - use of cable ties to secure loose mesh and unsafe means of operation |
2015
|
| FOD 2-2014 | Preventing catastrophic failure of luffing jib tower cranes in high winds |
2014
|
| FOD 2-2013 | Risks to occupiers from the installation of modular, stone and artificial stone fireplace surround |
2013
|
| FOD 1-2019 | Use of gas-fired oven cleaning equipment inside vehicles |
2019
|
| FOD 1-2018 | BendPak two post vehicle lifts – safety issues relating to locking mechanisms |
2018
|
| FOD 1-2017 | A-Belco Group, Hadar range of ATEX Lighting products |
2017
|
| FOD 1-2015 | Earth moving machinery |
2015
|
| FOD 1-2014 | Genie Z135/70 Mobile Elevated Work Platform (MEWP) |
2014
|
| FOD 1-2013 | Poor standards of health and safety in the demolition and dismantling of lifts |
2013
|
| FOD 1-2011 | Overturns of JLG 500RTS scissor lifts |
2011
|
| EPD 1-2020 | Air suspension systems on vehicles |
2020
|
| EPD 1-2018 | Revision of standards for powered doors, gates and barriers |
2018
|
| ED 3-2016 | Some ergonomic issues of DP vessel controls |
2016
|
| ED 2-2016 | Electrolytic chlorination units (electrolysis) in marine ballast treatment systems |
2016
|
| ED 2-2015 | Catastrophic failure of a pipework clamp connector |
2015
|
| ED 1-2018 | Cylinders manufactured from aluminium alloys HE30/AA6082 and AA6351 and used primarily for gases for underwater breathing apparatus |
2018
|
| ED 1-2016 | Offshore crane safety systems |
2016
|
| ED 1-2015 | External chloride stress corrosion cracking of stainless steel lokring pipe connectors |
2015
|
| CON 4-2010 | Deterioration and failure of cold / frozen food store ceilings |
2010
|
| CON 2-2018 | Tower crane, slew brakes and release mechanism maintenance |
2018
|
| CON 1-2018 | Preventing unauthorised access onto scaffolding and other work platforms |
2018
|
| CEMHD 2-2020 | Failure of a road tanker pressure/vacuum relief valve |
2021
|
| CEMHD 2-2019 | Catastrophic rupture of dead-leg pipe-work |
2019
|
| CEMHD 2-2018 | High temperature hydrogen attack: safe use of carbon steel |
2018
|
| CEMHD 1-2021 | Catastrophic failure of marine loading arm |
2021
|
| CEMHD 1-2020 | Failure to detect dangerous gas/vapour due to incorrect specification of sample tube |
2020
|
| CEMHD 1-2019 | Use of ICAR Capacitors in uninterruptable power supply (UPS) systems |
2019
|
| CEMHD 1-2018 | Personnel certification in non-destructive testing (PCN) scheme fraud |
2018
|
| CEMHD 1-2017 | Siemens - Maxum II Edition Gas Chromatograph - Safety Features |
2017
|